These 12” by 36” granular surfaced shingles are installed on slopes of 2 inches per running foot or greater.  They are installed over a felt under layment of usually a 15 or 30 pound felt, depending on the slope.  Shingles come in weights between 180 and 400 pounds per 10’ X 10’ or 100 square feet.

 

Uses:

 

The basic shingle is a commodity product typically used for residential applications.  Shingles may also be used on vertical parapet wall applications, provided special fastening patterns are followed.

 

Approximate Life Span:

 

The greater the slope of the roof, the faster the water runs off.  This is a determining factor in the life expectancy of the shingle.  The heavier the shingle, the longer the wearing surface lasts.  If shingles are dark in color and lightweight(180 lbs) expect a life of  7 to 9 years.  For a 400 pound fiberglass shingle, you can expect about 17 years.  For weighs somewhere in the middle, expect a life of about 12 to 15 years.

 

Caution:

 

  • Stay with lighter colors for longer shingle life expectancy.

 

  • Shingle exposure should be carefully measured to insure proper installation patterns.  A small error can throw off the entire roof pattern and allow leaks to occur.

 

Limitations:

 

Shingle manufactures require a minimum slope of 2” in 12”.  If you go below this and have a “blow off, “ your insurance company may not cover the damage.

Similar Posts

  • Tile Roofs

    Description: Tile roofs come in a variety of styles and materials.  They consist of one piece “S Tiles” that are seen on many office building roofs.  There are two piece tiles, called “Pans and Tops,” that are placed on Spanish style homes.  The tiles are made of sand-cast, fired clay, concrete construction, and “light concrete.” …

  • |

    Modified Bitumens

    Description:   These roofing systems are typically a single sheet, reinforced in the middle with either a polyester or fiberglass mat for strength and modified with rubberized asphalt.  This allows the roof to expand and contract with building movement.  The Modified sheet should be installed over a mechanically fastened base-sheet.  These systems are mopped in…

  • Built-Up Roofing

    Description Built-Up Roofing (BUR) is a traditional flat-roof system made by installing multiple layers of roofing felt bonded together with hot asphalt. These layers are assembled in “plies,” most commonly: The roof is finished with a protective surface, which may include: The asphalt between layers serves as the primary waterproofing. Common Uses BUR systems are…